| Design
Your Own Bag |
| |
|
Contact Buggybags Here EMAIL |
| Standard
BikeBag |
 |
|
Optional Extras BikeBag Can Incorporate a Map Pocket |
.JPG) |
| Dual Zipper,
complete with Integral Support Layer (these are optional extras) |
.JPG) |
| Lower Compartment |
 |
.JPG) |
|
Detailed Pictures of Bag Shown Below |
| No
10 Ykk Zip, we have been using these for 6 years |
|
| The Buggybags "Ziprotector" to minimise the ingress of water (note we have removed the velcro from the latest design as this was not required) |
.JPG) |
| Securely
Anchors to the Frame of your Bike |
 |
View
From Top of the Bag, Slim Fitting along the Top Tube |
.JPG) |
| Front Anchor Strap to the Head Stock, Adjustable to allow for Varying Frames |
.JPG) |
100mm
wide velcro used to attach bag to the Frame, aims to spread the weight
of the contents of the bag, across its whole length |
.JPG) |
| Design Your Own Bag |
| This is no Mass produced off the shelf product, each bag will be unique, designed by yourself, cut individually, and sewn by a Seamstress with over 30 years experience.
|
| To Allow us to make for the wide variety of Bike Frames on the Market we will require you to make an accurate template of your Frame, just like the ones below. (The more accurate the template the more accurate the finished bag, please note though finished dimensions are approximate)
The Template will need to hang freely in the frame as shown in the pictures below. We will also need to know the Circumference of your Top Tube, Seat Stem Tube and Down Tube, measured accurately with a piece of string, no Pie calculations please.
We will require you to send a picuture of the Template mounted in the frame, this will allow us to approve the design. Manufacturing Lead time is approximately 17 days (2.5 weeks) depending upon other work commitments, this will be confirmed at time of order. |
Thanks for this Picture Alasdair |
 |
| Thanks for this Picture Nik |
 |
Design Steps 1) Accurate Template 2) Circumference measurements of Top Tube, Seat Stem Tube and Down Tube
|
| We will also be able to offer Custom Fit Bags to your specifications, designed in line with your requirements.
This could include Kit Bags as per our Standard BuggBags Range, most of these are Made to Measure in line with your specifications, however we do make one Std Size 1.2m by 40cm by 40cm
|
We will be able to offer custom colours of Cordura, including Red, Green, Dark Green, Blue and Grey along with Customised Embroidery ie Club Name or your Name at nominal costs.
|
An example of Custom Embroidery can be seen in the GT Race Buggy Seat Shown Below
|
What's
in Your Bag! |
We Can Also Make Transit Bags Made to your Personal Dimensions |
 |
|
| |
| Buggybags Gpod Gps Holder |
|
|
 |
 |
 |
 |
Click on
the Gpods Option at the Top of the Screen |
.JPG)
